QNAP TR-004
   

QNAP TR-004

QNAP
QNP-TR-004

Expansion Unit : TR-004

4 Bay USB Type-C Direct Attached Storage with Hardware RAID

Drive Bays: 4

External Ports: Type-C USB 3.2 Gen 2 10Gbps x1

2 Years Warranty

----- Reference -----

QNAP TR-004, 4 Bays Expansion Unit, 4 Bay USB Type-C Direct Attached Storage with Hardware RAID, External Ports: Type-C USB 3.2 Gen 2 10Gbps x1, 2 Years Warranty

Drive Bays : 4-Bays NAS
check In Stock
Hurry! only 10 items left in stock.
0.00 ฿
Tax included
Quantity

Add to Compare
Add to Wishlist
สอบถามรายละเอียดและข้อมูลเพิ่มเติม

Expansion Unit TR-004

4 Bay USB Type-C Direct Attached Storage with Hardware RAID

The TR-004 USB 3.2 Gen 1 RAID expansion enclosure allows you to expand the capacity of your QNAP NAS and PC. The TR-004 can also be utilized as a DAS (Direct-attached Storage) device, allowing you to directly access its content just by connecting it via USB. The TR-004 features four 3.5-inch SATA drive bays with multiple RAID configuration options and USB 3.2 Gen 1 Type-C connectivity to bring you a highly reliable and secure storage capacity expansion solution.


USB 3.2 Gen 1 (5Gbps)

USB 3.2 Gen 1 Type-C port* for faster data transfer.

Maximum 1M USB cable is recommended.


Supports SATA drives

Supports up to four SATA drives for reliable read and write performance


Disk mode DIP switch

Disk mode DIP switch to change from Hardware Control and Software Control configurations for setting RAID group.


Lockable drive trays

Lockable hard drive trays to prevent accidental drive removal.


Easy to eject

Eject button for disconnecting the TR-004 from a NAS or computer*.

Requires the QNAP External RAID Manager utility.


Effective storage expansion with RAID Support

The TR-004 is an ideal storage expansion solution for PCs, especially for laptops which lack the ability to install larger, higher-capacity drives. Featuring four 3.5-inch SATA drive bays and supporting RAID configuration, the TR-004 provides the ability to store a vast number of files and data and to ensure protection against potential drive failure.

tr-004_raid.png?v=c31fade5bc738fedebe028fc9e2585f7

Supports various RAID levels

The TR-004 supports a variety of RAID configurations. Depending on your requirements, you can switch between hardware- or software-controlled RAID modes. Move the DIP switches to corresponding positions for your ideal RAID mode: Individual, JBOD, RAID 0, RAID 1/10 or RAID 5. You can also configure the RAID settings from your QNAP NAS, or by using the QNAP External RAID Manager utility on your computer.
» Learn more: External RAID Manager

mode-Individual.gif?v=c31fade5bc738fedebe028fc9e2585f7

Individual Mode

Treats every disk as separate storage space, allowing you to independently access each one.

Drive hot-swap is not supported in this mode

mode-JBOD.gif?v=ac8f7f38d3fb346a32972764b9034fc1

JBOD Mode

All the disks are recognized as a single drive. This allows maximal storage utilization but provides no data protection.

mode-RAID-0.gif?v=c31fade5bc738fedebe028fc9e2585f7

RAID 0 Mode

Data is split amongst the drives. RAID 0 provides the fastest performance but does not protect data from drive failure.

mode-RAID-1-10.gif?v=c31fade5bc738fedebe028fc9e2585f7

RAID 1/10 Mode

Half of the total storage capacity is used to store data, and the other half keeps a copy of this data. This provides high data protection at the cost of only being able to use half the installed storage space.

mode-RAID-5.gif?v=ac8f7f38d3fb346a32972764b9034fc1

RAID 5 Mode

RAID 5 requires at least three drives to use and parity information is distributed among the drives, providing optimized storage capacity and protection against one disk failing.

mode-software.gif?v=c31fade5bc738fedebe028fc9e2585f7

Software Ctrl Mode

Use this mode to control the RAID configuration from your NAS or computer.

RAID mode supported NAS expansion External storage for NAS External storage for Windows/Mac computer External storage for Linux computer
Software Ctrl Required to switch to Software Ctrl mode
Individual
JBOD
RAID 0/1/5/10
Multiple RAID

 Linux computers can recognize existing partitions on multiple RAID configurations, but they cannot create new ones. 


Use the TR-004 as an alternative to conventional NAS expansion enclosures

As an external hardware RAID device, the TR-004 operates independently and does not require additional NAS system resources. When compared with the UX-500P expansion enclosure, the TR-004 uses less NAS system resources.

Tested in QNAP Labs. Figures may vary by environment.


Test environment 1:
NAS: TS-932X-2G
QTS 4.3.6.0726 Build 20181011, Annapurna Labs Alpine AL324 Quad-core ARM Cortex-A57 CPU @ 1.70GHz, 2GB RAM, Seagate ST1000NM0033-9ZM173 *4, RAID5, Thick volume; Block-based LUN, Disable AIO, SMB3~1
TR-004
QTS 4.3.6.0738 Build 20181023, Samsung SSD 850 PRO 512GB *4, RAID10, Thick volume
UX-500P
QTS 4.3.4.0736 Build 20181010, Samsung SSD 850 PRO 512GB *4, RAID10, Thick volume

Test environment 2:
TR-004:
Volume type: RAID 0; 4 x 1TB Seagate ST1000NM0033 HDD
Client PC: Intel® Core™ i7-7700HQ 2.8GHz CPU; 32GB RAM; Windows® 10 64-bit


Extend hardware warranty up to 5 years

The TR-004 is backed by a 2-year warranty at no extra cost. If needed, you can purchase a warranty extension that increases your coverage up to 5 years.

Learn More: QNAP warranty services


Hardware Specification

JBOD Connection Interface USB
Main chip Micro processor with hardware RAID
Drive Bay 4 x 3.5-inch
The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility 3.5-inch bays:
3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s solid state drives
You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.

TR-004 does not support the QDA-A2AR/ QDA-A2MAR.
Hot-swappable
USB 3.2 Gen 1 Port 1 x Type-C USB 3.2 Gen 1 (USB 3.2 Gen 1)
Form Factor Tower
Dimensions (HxWxD) 168.5 × 160.2 × 219 mm
Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net) 3.18 kg
Weight (Gross) 3.18 kg
Operating Temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature 20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit Minimum 60W adapter (12VDC), 100-240VAC
Power Consumption: HDD Sleep Mode 4.17 W
Power Consumption: Operating Mode, Typical 18.21 W
Tested with drives fully populated.
Fan 1 x 120mm, 12VDC
System Warning Buzzer
Kensington Security Slot
QTS / QuTS hero
Windows
Ubuntu
Mac
Used as Hardware RAID (DAS)
Standard Warranty 2
RAID 10
RAID 5+ Spare
RAID 5
RAID 1
RAID 0
JBOD
Single Disk

: QNP-TR-004
: 10 Items
Hurry! only 10 items left in stock.